Programming

NOTE: this is about programming your own apps/instruments/toys while keeping the badge firmware stock. If you want to port Doom or work on the firmware, see the Firmware Development section.

The main programming interface and language for the flow3rbadge is Python. More exactly, it’s Micropython, which is a fairly sizeable subset of Python that can run on microcontrollers.

Good news: if you’ve ever used Micropython on an ESP32, then you probably already have all the tools required to get started. However, while the tools to program the badge might be the same as for stock Micropython on ESP32, our APIs are quite different.

If you haven’t used Micrpython, don’t worry. It’s not that difficult other than wrapping your head around file access.

The st3m framework is the main Python codebase you’ll be writing against. Instead of using standard Micropython libraries like machine or low level display drivers, you’ll be writing applications that implement st3m classes like Responder or Application.

But, enough intro for now, let’s get started.

Accessing the badge

When the badge runs (for example, when you see the main menu), you can connect it to a PC and it should appear as a serial device. On Linux systems, this device will be usually called /dev/ttyACM0 (sometimes /dev/ttyACM1).

You can then use any terminal emulator program (like picocom, GNU screen, etc) to access the badge’s runtime logs. Even better, use a dedicated micropython-specific program, as that will actually let you transfer files. These are the tools we’ve tested and are known to work:

Tool	Platforms
mpremote	Linux, macOS, Windows
Micro REPL	Android

In the rest of these docs we’ll use mpremote. But you should be able to follow along with any of the aforementioned tools. If you are on Linux and your flow3r came up as /dev/ttyACM1, add an a1 after mpremote.

After connecting your badge and making sure it runs:

$ mpremote
Connected to MicroPython at /dev/ttyACM0
Use Ctrl-] or Ctrl-x to exit this shell
[... logs here... ]

The badge will continue to run.

Warning

Your flow3r is not showing up using Linux?

To let mpremote to work properly your user needs to have access rights to ttyACM.

Quick fix: sudo chmod a+rw /dev/ttyACM[Your Device Id here]`

More sustainable fix: Setup an udev rule to automatically allow the logged in user to access ttyUSB

To use this, add the following to /etc/udev/rules.d/60-extra-acl.rules: KERNEL=="ttyACM[0-9]*", TAG+="udev-acl", TAG+="uaccess"

Reload udevadm control --reload-rules && udevadm trigger

Now, if you press Ctrl-C, you will interrupt the firmware and break into a Python REPL (read-eval-print-loop) prompt:

Traceback (most recent call last):
  File "/flash/sys/main.py", line 254, in <module>
  [... snip ...]
KeyboardInterrupt:
MicroPython c48f94151-dirty on 1980-01-01; badge23 with ESP32S3
Type "help()" for more information.
>>>

The badge’s display will now switch to ‘In REPL’ to indicate that software execution has been interrupted and that the badge is waiting for a command over REPL.

Congratulations! You can now use your badge as a calculator:

>>> 5 + 5
10

But that’s not super interesting. Let’s try to turn on some LEDs:

>>> import leds
>>> leds.set_rgb(0, 255, 0, 0)
>>> leds.update()

The LED right next to the USB connector should light up red. You can continue experimenting with different APIs (like leds, audio, etc).

Transferring files over REPL

You can also access the filesystem over the same Micropython serial port:

$ mpremote
MicroPython c48f94151-dirty on 1980-01-01; flow3r with ESP32S3
Type "help()" for more information.
>>> import os
>>> os.listdir('/')
['flash']
>>> os.listdir('/flash/sys')
['main.py', 'st3m', '.sys-installed']
>>>

$ mpremote ls :/flash/sys
ls :/flash/sys
           0 main.py
           0 st3m
           0 .sys-installed

Disk Mode

For larger file transfers (eg. images, sound samples, etc.) you can put the badge into Disk Mode by selecting Settings -> Disk Mode in the badge’s menu.

You can then select whether to mount the 10MiB internal flash or SD card (if present) as a pendrive. The selected device will then appear as a pendrive on your system, and will stay until it is ejected. The serial connection will disconnect for the duration of the badge being in disk mode.

Disk Mode can also be enabled when the badge is in Recovery Mode.

Writing Applications

Once you feel some familiary with the REPL, you’re ready to advance to the next chapter: writing full-fledged applications that can draw graphics on the screen, respond to input and play sound!

Basics

Implementing a responsive user interface on a resource constrained device which at the same time should also output glitch free audio is not the easiest task in the world. The flow3r application programming environment tries make it a bit easier for you.

There are two major components to the running an app on the flower: the Reactor and at least one or more Responder s. The Reactor is a component which comes with the flow3r and takes care of all the heavy lifting for you. It decides when it is time to draw something on the display and it also gathers the data from a whole bunch of inputs like captouch or the buttons for you to work with.

A responder is a software component which can get called by the Reactor and is responsible to react to the input data and when asked draw something to the screen.

Example 1a: Display something

Let’s have a look at a very simple example involving a responder:

from st3m.reactor import Responder
import st3m.run

class Example(Responder):
    def __init__(self) -> None:
        pass

    def draw(self, ctx: Context) -> None:
        # Paint the background black
        ctx.rgb(0, 0, 0).rectangle(-120, -120, 240, 240).fill()

        # Paint a red square in the middle of the display
        ctx.rgb(255, 0, 0).rectangle(-20, -20, 40, 40).fill()

    def think(self, ins: InputState, delta_ms: int) -> None:
        pass


st3m.run.run_responder(Example())

You can save this example as a Python file (e.g. example.py) and run it using mpremote run example.py. It should display a red square in the middle of the display and do nothing else.

You might already be able to guess the meaning of the three things that a responder has to implement:

Function	Meaning
__init__()	Called once before any of the other methods is run.
draw()	Called each time the display should be drawn.
think()	Called regularly with the latest input and sensor readings

It’s important to note that none of these methods is allowed take a significant amount of time if you want the user interface of the flow3r to feel snappy. You also need to make sure that each time draw() is called, everything you want to show is drawn again. Otherwise you will experience strange flickering or other artifacts on the screen.

Example 1b: React to input

If we want to react to the user, we can use the InputState which got handed to us. In this example we look at the state of the app (by default left) shoulder button. The values for buttons contained in the input state are one of InputButtonState.PRESSED_LEFT, PRESSED_RIGHT, PRESSED_DOWN, NOT_PRESSED - same values as in the low-level sys_buttons.

from st3m.reactor import Responder
import st3m.run

class Example(Responder):
    def __init__(self) -> None:
        self._x = -20

    def draw(self, ctx: Context) -> None:
        # Paint the background black
        ctx.rgb(0, 0, 0).rectangle(-120, -120, 240, 240).fill()

        # Paint a red square in the middle of the display
        ctx.rgb(255, 0, 0).rectangle(self._x, -20, 40, 40).fill()

    def think(self, ins: InputState, delta_ms: int) -> None:
        direction = ins.buttons.app

        if direction == ins.buttons.PRESSED_LEFT:
            self._x -= 1
        elif direction == ins.buttons.PRESSED_RIGHT:
            self._x += 1


st3m.run.run_responder(Example())

Try it: when you run this code, you can move the red square using the app (by default left) shoulder button.

Example 1c: Taking time into consideration

The previous example moved the square around, but could you tell how fast it moved across the screen? What if you wanted it to move exactly 20 pixels per second to the left and 20 pixels per second to the right?

The think() method has an additional parameter we can use for this: delta_ms. It represents the time which has passed since the last call to think().

from st3m.reactor import Responder
import st3m.run

class Example(Responder):
    def __init__(self) -> None:
        self._x = -20.

    def draw(self, ctx: Context) -> None:
        # Paint the background black
        ctx.rgb(0, 0, 0).rectangle(-120, -120, 240, 240).fill()

        # Paint a red square in the middle of the display
        ctx.rgb(255, 0, 0).rectangle(self._x, -20, 40, 40).fill()

    def think(self, ins: InputState, delta_ms: int) -> None:
        direction = ins.buttons.app # -1 (left), 1 (right), or 2 (pressed)

        if direction == ins.buttons.PRESSED_LEFT:
            self._x -= 20 * delta_ms / 1000
        elif direction == ins.buttons.PRESSED_RIGHT:
            self._x += 40 * delta_ms / 1000


st3m.run.run_responder(Example())

This becomes important if you need exact timings in your application, as the Reactor makes no explicit guarantee about how often think() will be called. Currently we are shooting for once every 20 milliseconds, but if something in the system takes a bit longer to process something, this number can change from one call to the next.

Example 1d: Automatic input processing

Working on the bare state of the buttons and the captouch petals can be cumbersome and error prone. the flow3r application framework gives you a bit of help in the form of the InputController which processes an input state and gives you higher level information about what is happening.

The InputController contains multiple Pressable sub-objects, for example the app/OS buttons are available as following attributes on the InputController:

Attribute on `InputControlller`	Meaning
`.buttons.app.left`	App button, pushed left
`.buttons.app.middle`	App button, pushed down
`.buttons.app.right`	App button, pushed right
`.buttons.os.left`	OS button, pushed left
`.buttons.os.middle`	OS button, pushed down
`.buttons.os.right`	OS button, pushed right

And each Pressable in turn contains the following attributes, all of which are valid within the context of a single think() call:

Attribute on `Pressable`	Meaning
`.pressed`	Button has just started being pressed, ie. it’s a Half Press down.
`.down`	Button is being held down.
`.released`	Button has just stopped being pressed, ie. it’s a Half Press up.
`.up`	Button is not being held down.

The following example shows how to properly react to single button presses without having to think about what happens if the user presses the button for a long time. It uses the InputController to detect single button presses and switches between showing a circle (by drawing a 360 deg arc) and a square.

from st3m.reactor import Responder
from st3m.input import InputController
from st3m.utils import tau

import st3m.run

class Example(Responder):
    def __init__(self) -> None:
        self.input = InputController()
        self._x = -20.
        self._draw_rectangle = True

    def draw(self, ctx: Context) -> None:
        # Paint the background black
        ctx.rgb(0, 0, 0).rectangle(-120, -120, 240, 240).fill()

        # Paint a red square in the middle of the display
        if self._draw_rectangle:
            ctx.rgb(255, 0, 0).rectangle(self._x, -20, 40, 40).fill()
        else:
            ctx.rgb(255, 0, 0).arc(self._x, -20, 40, 0, tau, 0).fill()

    def think(self, ins: InputState, delta_ms: int) -> None:
        self.input.think(ins, delta_ms) # let the input controller to its magic

        if self.input.buttons.app.middle.pressed:
            self._draw_rectangle = not self._draw_rectangle

        if self.input.buttons.app.left.pressed:
            self._x -= 20 * delta_ms / 1000
        elif self.input.buttons.app.right.pressed:
            self._x += 40 * delta_ms / 1000


st3m.run.run_responder(Example())

Managing multiple views

If you want to write a more advanced application you probably also want to display more than one screen (or view as we call them). With just the Responder class this can become a bit tricky as it never knows when it is visible and when it is not. It also doesn’t directly allow you to launch a new screen.

To help you with that you can use a View instead. It can tell you when it becomes visible, when it is about to become inactive (invisible) and you can also use it to bring a new screen or widget into the foreground or remove it again from the screen.

Example 2a: Managing two views

In this example we use a basic View to switch between to different screens using a button. One screen shows a red square, the other one a green square. You can of course put any kind of complex processing into the two different views. We make use of an InputController again to handle the button presses.

from st3m.input import InputController
from st3m.ui.view import View
import st3m.run

class SecondScreen(View):
    def __init__(self) -> None:
        self.input = InputController()
        self._vm = None

    def on_enter(self, vm: Optional[ViewManager]) -> None:
        self._vm = vm

        # Ignore the button which brought us here until it is released
        self.input._ignore_pressed()

    def draw(self, ctx: Context) -> None:
        # Paint the background black
        ctx.rgb(0, 0, 0).rectangle(-120, -120, 240, 240).fill()
        # Green square
        ctx.rgb(0, 255, 0).rectangle(-20, -20, 40, 40).fill()

    def think(self, ins: InputState, delta_ms: int) -> None:
        self.input.think(ins, delta_ms) # let the input controller to its magic

        # No need to handle returning back to Example on button press - the
        # flow3r's ViewManager takes care of that automatically.


class Example(View):
    def __init__(self) -> None:
        self.input = InputController()
        self._vm = None

    def draw(self, ctx: Context) -> None:
        # Paint the background black
        ctx.rgb(0, 0, 0).rectangle(-120, -120, 240, 240).fill()
        # Red square
        ctx.rgb(255, 0, 0).rectangle(-20, -20, 40, 40).fill()


    def on_enter(self, vm: Optional[ViewManager]) -> None:
        self._vm = vm
        self.input._ignore_pressed()

    def think(self, ins: InputState, delta_ms: int) -> None:
        self.input.think(ins, delta_ms) # let the input controller to its magic

        if self.input.buttons.app.middle.pressed:
            self._vm.push(SecondScreen())

st3m.run.run_view(Example())

Try it using mpremote. The right shoulder button switches between the two views. To avoid that the still pressed button immediately closes SecondScreen we make us of a special method of the InputController which hides the pressed button from the view until it is released again.

Example 2b: Easier view management

The above code is so universal that we provide a special view which takes care of this boilerplate: BaseView. It integrated a local InputController on self.input and a copy of the ViewManager which caused the View to enter on self.vm.

Here is our previous example rewritten to make use of BaseView:

from st3m.ui.view import BaseView
import st3m.run

class SecondScreen(BaseView):
    def __init__(self) -> None:
        # Remember to call super().__init__() if you implement your own
        # constructor!
        super().__init__()

    def on_enter(self, vm: Optional[ViewManager]) -> None:
        # Remember to call super().on_enter() if you implement your own
        # on_enter!
        super().on_enter(vm)

    def draw(self, ctx: Context) -> None:
        # Paint the background black
        ctx.rgb(0, 0, 0).rectangle(-120, -120, 240, 240).fill()
        # Green square
        ctx.rgb(0, 255, 0).rectangle(-20, -20, 40, 40).fill()

class Example(BaseView):
    def draw(self, ctx: Context) -> None:
        # Paint the background black
        ctx.rgb(0, 0, 0).rectangle(-120, -120, 240, 240).fill()
        # Red square
        ctx.rgb(255, 0, 0).rectangle(-20, -20, 40, 40).fill()

    def think(self, ins: InputState, delta_ms: int) -> None:
        super().think(ins, delta_ms) # Let BaseView do its thing

        if self.input.buttons.app.middle.pressed:
            self.vm.push(SecondScreen())

st3m.run.run_view(Example())

Writing an application for the menu system

All fine and good, you were able to write an application that you can run with mpremote, but certainly you also want to run it from flow3r’s menu system.

Let’s introduce the final class you should actually be using for application development: Application. It builds upon BaseView (so you still have access to self.input and self.vm) but additionally is made aware of an ApplicationContext on startup and can be registered into a menu.

Here is our previous code changed to use Application for the base of its main view:

from st3m.application import Application, ApplicationContext
from st3m.ui.view import BaseView, ViewManager
from st3m.input import InputState
from ctx import Context
import st3m.run

class SecondScreen(BaseView):
    def draw(self, ctx: Context) -> None:
        # Paint the background black
        ctx.rgb(0, 0, 0).rectangle(-120, -120, 240, 240).fill()
        # Green square
        ctx.rgb(0, 255, 0).rectangle(-20, -20, 40, 40).fill()

class MyDemo(Application):
    def __init__(self, app_ctx: ApplicationContext) -> None:
        super().__init__(app_ctx)
        # Ignore the app_ctx for now.

    def draw(self, ctx: Context) -> None:
        # Paint the background black
        ctx.rgb(0, 0, 0).rectangle(-120, -120, 240, 240).fill()
        # Red square
        ctx.rgb(255, 0, 0).rectangle(-20, -20, 40, 40).fill()

    def think(self, ins: InputState, delta_ms: int) -> None:
        super().think(ins, delta_ms) # Let Application do its thing

        if self.input.buttons.app.middle.pressed:
            self.vm.push(SecondScreen())

if __name__ == '__main__':
    # Continue to make runnable via mpremote run.
    st3m.run.run_view(MyDemo(ApplicationContext()))

Using Application also gives you access to the ApplicationContext, which for example gives you a way to find out the base path of your app, in app_ctx.bundle_path. For a sample app using this, see schneider’s nyan-cat fork.

To add the application to the menu we are missing one more thing: a flow3r.toml file which describes the application so flow3r knows where to put it in the menu system. Together with the Python code this file forms a so called bundle (see also BundleMetadata).

[app]
name = "My Demo"
menu = "Apps"

[entry]
class = "MyDemo"

[metadata]
author = "You :)"
license = "pick one, LGPL/MIT maybe?"
url = "https://git.flow3r.garden/you/mydemo"

Save this as flow3r.toml together with the Python code as __init__.py in a folder (name doesn’t matter) and put that folder into the /flash/sys/apps folder on your flow3r (visible as sys/apps in Disk Mode). Restart the flow3r and it should pick up your new application.

Distributing applications

We have an “App Store” where you can submit your applications: https://flow3r.garden/apps/

To add your application, follow the guide in this repository: https://git.flow3r.garden/flow3r/flow3r-apps

Using the simulator

The flow3r badge firmware repository comes with a Python-based simulator which allows you to run the Python part of st3m on your local computer, using Python, Pygame and wasmer.

Currently the simulator supports the display, LEDs, the buttons and some static input values from the accelerometer, gyroscope, temperature sensor and pressure sensor.

It does not support any audio API, and in fact currently doesn’t even stub out the relevant API methods, so it will crash when attempting to run any Music app. It also does not support positional captouch APIs.

To set the simulator up, clone the repository and prepare a Python virtual environment with the required packages:

$ git clone https://git.flow3r.garden/flow3r/flow3r-firmware
$ cd flow3r-firmware
$ python3 -m venv venv
$ venv/bin/pip install pygame wasmer wasmer-compiler-cranelift

Note

The wasmer python module doesn’t work with Python versions 3.10 or 3.11, use Python 3.9 instead. You will get ImportError: Wasmer is not available on this system when trying to run the Simulator.

TODO: set up a pyproject/poetry/… file?

You can then run the simulator:

$ venv/bin/python sim/run.py

Grey areas near the petals and buttons can be pressed.

The simulators apps live in python_payload/apps copy you app folder in there and it will appear in the simulators menu system.

TODO: make simulator directly run a bundle on startup when requested